526-00
HA-WELD® electrofusion saddle with ZAK® outlet
| Material: |
Top and bottom saddle halves: PE 100 ZAK® insert: brass |
|---|---|
| Max. operating Pressure: |
Potable water: 16 bar Gas: 10 bar |
| Medium | Water / Gas |
HA-WELD® welding clamps are to be used for welding on PE pipes according to DIN EN 12201 / DIN 8074.
The joint surfaces (pipe surface and inside of the fitting) are heated to welding temperature by electrical energy using resistance wires in the fitting (heating coil) and welded to the pipe.
The parameters of the saddle fitting required for the welding process are recorded by the welding device by reading in a component-specific barcode. The barcode is located on the upper shell.
HA-WELD® have a universal PIN for welding equipment (suitable for 4.0 and 4.7 mm plugs). No plug adapter is required.
The top outlet is used in combination with ZAK fittings to connect service lines.
In combination with ZAK46 house connection fittings, the HA-WELD® welding clamp can be used for easy tapping of the main pipe, even when in operation.
|
Order Nr.
|
L |
B |
D |
H |
Borehole max. |
Outlet O |
Medium | Weight | Specification | Basket |
|---|---|---|---|---|---|---|---|---|---|---|
|
5261090046
|
170 mm | 145 mm | 90 mm | 155 mm | 36 mm | ZAK 46 | 1,20 kg | |||
|
5261110046
|
170 mm | 180 mm | 110 mm | 177 mm | 36 mm | ZAK 46 | 1,50 kg | |||
|
5261125046
|
170 mm | 180 mm | 125 mm | 189 mm | 36 mm | ZAK 46 | 1,40 kg | |||
|
5261160046
|
170 mm | 220 mm | 160 mm | 224 mm | 36 mm | ZAK 46 | 1,70 kg | |||
|
5261225046
|
170 mm | 295 mm | 225 mm | 290 mm | 36 mm | ZAK 46 | 2,31 kg |