Hawle Germany
Products
Gate Valves
Welding technology
Gate valve "E2" and "E3" type D with PE fusion ends for gas

453-00G
Gate valve "E2" and "E3" type D with PE fusion ends for gas

Shut-off valve with two PE fusion ends (model no. 452PE) for welding into PE pipelines via electrofusion welding or butt welding. Apart from actuation via handhweel or extension spindle the valve is also suitable for position indicator or electric actuators.

Use for gas: tested PG-1 or PG-3; incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength test performed.

read more reduce

Material:	Body/lock ring: GJS-400, Hawle epoxy powder coated Spindle: stainless steel Wedge nut: brass Wedge: GJS-400, inside and outside NBR for gas Gaskets: NBR for gas PE end: PE 100 incl. support liner of stainless steel
Max. operating Pressure:	See table
Medium	Gas

Use for gas: tested PG-1 or PG-3; incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength test performed.

Contacts

Wish List

Models

Order Nr.	DN	Operating pressure max.	d	Type / Outlet	L	L1	B	H	Weight
4530900001	80	10 bar	90 mm	Typ E2	660 mm	150 mm	8,2 mm	335 mm	26,00 kg
4531100001	100	10 bar	110 mm	Typ E2	710 mm	170 mm	10 mm	375 mm	30,00 kg
4531250001	100	10 bar	125 mm	Typ E2	740 mm	185 mm	11,4 mm	375 mm	34,00 kg
4531400001	125	10 bar	140 mm	Typ E2	835 mm	205 mm	12,7 mm	450 mm	51,70 kg
4531600001	150	10 bar	160 mm	Typ E2	1030 mm	205 mm	14,6 mm	460 mm	55,00 kg
4531800001	150	10 bar	180 mm	Typ E2	1050 mm	230 mm	16,4 mm	460 mm	54,00 kg
4532000001	200	10 bar	200 mm	Typ E2	1125 mm	245 mm	18,2 mm	565 mm	89,00 kg
4532250001	200	10 bar	225 mm	Typ E2	1155 mm	260 mm	20,5 mm	565 mm	91,00 kg

Wish List

: Version for gas PG 3 on request
: Version SDR 17 on request
: Use for gas: tested acc. to DIN 3230-5 PG-1 or PG-3; incl. acceptance certificate 3.1 acc. to EN 10204 for the tightness and strength tests performed acc. to DIN 3230- 5.

4530900001

Product: Hawle (see Ord. No. 453-00G) or equivalent
Resilient-seated shut-off valve acc. to EN 12266-1, for potable water acc. to EN 1074-1, EN 1074-2 and 12266-1 and/or for gas acc. to DIN EN 13774 and DIN 3230-5, with two push-fit sockets and factory-mounted PE fittings with integral support liners of stainless steel, locking and restraint joint through ductile retaining ring with epoxy powder coating, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5.

Material:
Body/locking rings: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 16 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 90 mm, SDR 11

4531100001

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 110 mm, SDR 11

4531250001

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 125 mm, SDR 11

4531400001

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 140 mm, SDR 11

4531600001

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 160 mm, SDR 11

4531800001

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 180 mm, SDR 11

4532000001

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 200 mm, SDR 11

4532250001

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 225 mm, SDR 11

Gate Valves

Butterfly Valves

Pipe Fittings, Connection technology, Pipe coupling

Hydrants

restraints, gaskets, grip rings, twist lock device

Pipe drilling saddle

Service valves

Fittings

Air Release Valves, Sets

Extension spindles, hand wheels, Operating

Surface boxes / Manhole cover

Control Valves & Strainers

Pipe Repair Clamps / tapping saddle

back flow preventer & controlling box

wall inlet fittings

water meter chamber

Tools and Adapters

Hawle Germany

Hawle International

International sales partner

General Notes

Operating Instructions

Technical documents

Brochures

Videos

Planning program / Software

News

453-00G
Gate valve "E2" and "E3" type D with PE fusion ends for gas

453-00G Gate valve "E2" and "E3" type D with PE fusion ends for gas

453-00G
Gate valve "E2" and "E3" type D with PE fusion ends for gas