405-00G
Gate valve "E2" and "E3" with PE fusion ends

Product: Hawle (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 32 mm, SDR 11

Product: Hawle (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 40 mm, SDR 11

Product: Hawle (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 50 mm, SDR 11

Product: Hawle (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 63 mm, SDR 11

Product: Hawle Type E3 (see Ord. No. 405-00G) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 75 mm, SDR 11"

Product: Hawle Type E3 (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to KTW-BWGL for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 5 bar
PE fitting: d 75 mm, SDR 17

Product: Hawle Type E3 (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 90 mm, SDR 11"

Product: Hawle Type E3 (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 5 bar
PE fitting: d 90 mm, SDR 17"

Product: Hawle Type E3 (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 16 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to KTW-BWGL for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
DN 100
Max. operating pressure: 10 bar
PE fitting: d 110 mm, SDR 11

Product: Hawle Type E3 (see Ord. No. 405-00G) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 16 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to KTW-BWGL for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
DN 100
Max. operating pressure: 5 bar
PE fitting: d 110 mm, SDR 17"

Product: Hawle (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 125 mm, SDR 11

Product: Hawle Typ E3 (see Ord. No. 405-00G) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 16 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. KTW-BWGL for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
DN 100
Max. operating pressure: 5 bar
PE fitting: d 125 mm, SDR 17

Product: Hawle (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 140 mm, SDR 11

Product: Hawle Typ E3 (see Ord. No. 405-00G) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. KTW-BWGL for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 5 bar
PE fitting: d 140 mm, SDR 17

Product: Hawle Type E3 (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 160 mm, SDR 11"

Product: Hawle Type E3 (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 5 bar
PE fitting: d 160 mm, SDR 17"

Product: Hawle Type E3 (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 180 mm, SDR 11"

Product: Hawle Type E3 (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 5 bar
PE fitting: d 180 mm, SDR 17"

Product: Hawle Type E3 (see Ord. No. 405-00G) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to KTW-BWGL for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 5 bar
PE fitting: d 200 mm, SDR 11

Product: Hawle Type E3 (see Ord. No. 405-00G) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to KTW-BWGL for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 5 bar
PE fitting: d 200 mm, SDR 17

Product: Hawle Type E3 (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 10 bar
PE fitting: d 225 mm, SDR 11"

Product: Hawle Type E3 (see Ord. No. 405-00) or equivalent
Resilient-seated shut-off valve with two PE fittings and integral support liners of stainless steel, maintenance-free spindle sealing via O-rings and lip seals, low-friction bearing of spindle on sliding discs of plastic, DN 50 - DN 200: round thread adaptor at the bonnet for pinless fixing of extension spindle, DN 250 - DN 600: pin hole in the spindle for connection of extension spindle, wedge guide of wear-free plastic with good sliding properties ensures low wear and minimum closing torques, edge protection of PE protects valve during storage and transportation, for use with gas tested to DIN 3230-5 PG-1 or PG-3, incl. acceptance certificate 3.1 acc. to EN 10204 for tightness and strength tests performed acc. to DIN 3230-5, test regulations: potable water acc. to EN 1074-1, EN 1074-2 and EN 12266-1, gas acc. to DIN EN 13774, EN 12266-1 and DIN 3230-5.

Material:
Body: GJS-400, corrosion protection due to epoxy powder coating inside and outside acc. to quality assurance RAL-GZ 662 of the Gütegemeinschaft Schwerer Korrosionsschutz GSK (Quality Association for Heavy-Duty Corrosion Protection) considering DIN 3476 (P) and DIN 30677-2 (coating thickness: min. 0.25 mm, zero-porosity at 3 kV, adhesion inside and outside min. 12 N/mm² after exposure to hot water, proof of suitability for potable water applications, external monitoring through neutral testing institute)
Spindle: stainless steel
Wedge nut: brass
Wedge: GJS-400, EPDM inside and outside acc. to DVGW W 270 and KTW for water and/or NBR for gas
PE fittings: PE 100, pipe wall thickness acc. to DIN 8074
Support liners: stainless steel

Medium: natural gas acc. to DVGW G 260; fluid group 1, tested to PG 1
Max. operating pressure: 5 bar
PE fitting: d 225 mm, SDR 17